|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Future Communications Integrated circuit Inc. FC7103 Power Amplifier Module for CDMA/AMPS DESCRIPTION The FC7103 is a high power, high efficiency amplifier module for dual mode AMPS/CDMA wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology. Selectable bias modes that optimize efficiency for different output power levels, and a shutdown mode with low leakage current, serve to increase handset talk and standby time. The 10 Pin 4mm X 4mm surface mount package offers premium performance in a 50 system. FEATURES l Operating Frequency: 824~849MHz l High Efficiency n 56% AMPS, 42.5% CDMA l Very Low Quiescent Current: 32mA l Low Leakage Current in Shutdown Mode: < 3uA l Optimized for a 50 PIN CONFIGURATION APPLICATIONS l Single Mode CDMA Wireless Handsets l Dual Mode AMPS/CDMA Wireless Handsets FUNCTIONAL BLOCK DIAGRAM (X- ray Transparency Top View) For latest specifications, technical questions and additional product information, visit our website or e-mail us. Web: http://www.fci.co.kr FCI Inc. E-mail : info@fci.co.kr 2nd Fl. Korea First Bank B/D, 6-8 Sunae-Dong Pundang-Gu, Sungnam City, Kyunggi-do, Tel : 82-31-711-6444 463-020, KOREA Fax: 82-31- 714-6576 Preliminary 1/6 Last Update 02/25/04 Future Communications Integrated circuit Inc. FC7103 Power Amplifier Module for CDMA/AMPS ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage (Vcc) Mode Control Voltage (VMODE) Reference Voltage (VREF) RF Input Power (RF IN) Storage Temperature (Tstg) Unit V V V dBm C Min 0 0 0 -40 Max +5 +3.5 +3.5 +7 +150 Stress in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. RECOMMENDED OPERATING CONDITIONS Parameter Operating Frequency(f) Supply Voltage(Vcc) Reference Voltage (VREF) Unit MHz V V Min 824 +3.0 +2.8 0 +2.5 0 Typ +3.4 +2.85 +3.0 +31 +28 Max 849 +4.2 +2.9 +0.5 +3.1 +0.5 PA "on" PA "shut down" Low Bias Mode High Bias Mode AMPS, Vcc=+3.4V CDMA, Vcc=+3.4V Note Mode Control Voltage(VMODE) RF Output Power (RF OUT) V dBm The device may be operated safely over these conditions. BIAS CONTROL Power Mode CDMA High Power Mode CDMA Low Power Mode AMPS Mode Shut Down VREF 2.85V 2.85V 2.85V 0.0V VMODE 0~0.5V 2.5~3V 0~0.5V 0.0V Range <28dBm <28dBm <31dBm - Preliminary 2/6 Last Update 02/25/04 Future Communications Integrated circuit Inc. FC7103 Power Amplifier Module for CDMA/AMPS ELECTRICAL CHARACTERISTICS (Typical values are at T = +25E and Vcc = 3.4V) Specification Parameter Unit Min Gain dB Typ 27 27.5 26 -50 -59 -57 -77 56 40.5 8.5 85 24.5 25.5 24.5 -49 -52 -55 -68 58 42.5 10.0 32 3 1 3 -138 -50 -50 1.5:1 10:1 Max Through Vref Pin Through Vmode Pin Vcc=3.4V, Vref=0V, Vmode=0V 869MHz to 894MHz Pout=31dBm Pout=28dBm Pout=16dBm Pout=28dBm Pout=16dBm Pout=28dBm Pout=16dBm Pout=31dBm Pout=28dBm Pout=16dBm Pout=31dBm Pout=28dBm Pout=16dBm Pout=28dBm Pout=16dBm Pout=28dBm Pout=16dBm Pout=31dBm Pout=28dBm Pout=16dBm Note Adjacent Channel Power at 885kHz offset* High Mode (Vmode=0V) Adjacent Channel Power At 1.98MHz offset* Power-Added Efficiency dBc dBc % Quiescent Current (Icq) mA Gain Adjacent Channel Power at 885kHz offset* Low Mode (Vmode=3V) Adjacent Channel Power At 1.98MHz offset* Power-Added Efficiency dB dBc dBc % Quiescent Current (Icq) Reference Current Mode Control Current Leakage Current Noise in Receive Band Harmonics 2fo Harmonics 3fo Input Impedance Ruggedness-No damage mA mA mA uA DBm/H z dBc - Pout<31dBm VSWR VSWR Pout<28dBm, all phases Last Update 02/25/04 Preliminary 3/6 Future Communications Integrated circuit Inc. FC7103 Power Amplifier Module for CDMA/AMPS *Test Condition; Primary Channel BW=1.23 MHz, Adjacent Channel BW=30 kHz PIN DESCRIPTION Pin 1 2 3 4 5 Name VREF VMODE GND RF IN VCC1 Description Reference Voltage Mode Control Voltage Ground RF Input Supply Voltage Pin 6 7 8 9 10 Name VCC2 GND RFOUT GND GND Description Supply Voltage Ground RF Output Ground Ground EVALUATION BOARD SCHEMATIC VREF 1nF VMODE 1nF RF IN FC 7103 1 VREF 2 3 GND 4 RF IN 5 VCC1 10uF 10uF GND 10 GND 9 RF OUT GND VCC2 VCC1 A;1uF A;1uF EVALUATION BOARD ASSEMBLY DIAGRAM Preliminary 4/6 Last Update 02/25/04 Future Communications Integrated circuit Inc. FC7103 Power Amplifier Module for CDMA/AMPS TURN ON SEQUENCE 1. 2. 3. Connect the amplifier to 50 RF input and output cables. Set the VCC1 and VCC2 supplies to +3.4V, and observed a current of 0mA. Set the VREF supply to +2.85V. Observe a current draw of approximately 85mA from the VCC supplies. (VMODE=0V, so the amplifier is in High Bias Mode) 4. Apply an RF signal and measure the RF performance. TURN OFF SEQUENCE 1. Turn off the RF signal. Do not disconnect the PA from the RF SMAs before first turn off the DC connections. 2. 3. Turn off the VREF and VMODE first and then turn off the VCC1 and VCC2. Disconnect the PAM from the test set up. PACKAGE OUTLINE AND DIMENSIONS Preliminary 5/6 Last Update 02/25/04 Future Communications Integrated circuit Inc. FC7103 Power Amplifier Module for CDMA/AMPS PIN 1 INDICA TOR 10 2 9 Line 1 Device Marking Description FCI's Company Name 7103 = Product Name YMDX LOT Code Y = Year code M = Month code D = Day code X = Manufacture code Pin 1 Identifier 3 7103 4 YMDX 5 43/40.05 TOP VIEW 8 43/40.05 2 7 3 6 1.0 0.483/40.04 0.45 2.0 0.85 0.4 0.2 2.0 BOTTOM VIEW 0.1 SIDE VIEW 1.33/40.08 Preliminary 6/6 Last Update 02/25/04 |
Price & Availability of FC7103 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |